D-Link xStack DGS-3620 Reference Manual page 206

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# clear bgp all
Command: clear bgp all
Success.
DGS-3620-28PC:admin#
12-35 clear bgp dampening
Description
This command clears the route dampening information stored in the routing table. If no IP/IPv6
address or IP/IPv6 network is specified, the dampening information for the entire routing table of
the IPv4 unicast or IPv6 unicast address family will be cleared. If both the IPv4 unicast and IPv6
unicast options are not specified, the dampening information for the IPv4 unicast routing table will
be cleared.
Format
clear bgp dampening {[ipv4 unicast {[<ipaddr> | <network_address>]} | [<ipaddr> |
<network_address>] | ipv6 unicast {[<ipv6addr> | <ipv6_networkaddr>]}]}
Parameters
ipv4 unicast - (Optional) Specifies to clear the dampening information for the IPv4 unicast
address family.
<ipaddr> - Enter the IPv4 address used here.
<network_address> - Enter the IPv4 network address here.
ipv6 unicast - (Optional) Specifies to clear the dampening information for the IPv6 unicast
address family.
<ipv6addr> - Enter the IPv6 address used here.
<ipv6_networkaddr> - Enter the IPv6 network address here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To clear route dampening information for network 192.168.10.0/24 and free suppressed routes:
DGS-3620-28PC:admin#
Command: clear bgp dampening 192.168.10.0/24
Success.
DGS-3620-28PC:admin#
clear bgp dampening 192.168.10.0/24
201