D-Link xStack DGS-3620 Reference Manual page 773

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show mac_based_access_control_local
Command: show mac_based_access_control_local
MAC Address
-----------------
00-00-00-00-00-01
Total Entries:1
DGS-3620-28PC:admin#
To display MAC-based access control local data by MAC address:
DGS-3620-28PC:admin#show mac_based_access_control_local mac 00-00-00-00-00-01
Command: show mac_based_access_control_local mac 00-00-00-00-00-01
MAC Address
-----------------
00-00-00-00-00-01
Total Entries:1
DGS-3620-28PC:admin#
To display MAC-based access control local data by VLAN:
DGS-3620-28PC:admin#show mac_based_access_control_local vlan default
Command: show mac_based_access_control_local vlan default
MAC Address
-----------------
00-00-00-00-00-01
Total Entries: 1
DGS-3620-28PC:admin#
64-18 config mac_based_access_control log state
Description
This command is used to enable or disable the generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
state - Specifies the log state for MAC-based Access Control.
enable - Specifies that the log for MAC-based Access Control will be enabled.
disable - Specifies that the log for MAC-based Access Control will be disabled.
VID
------
1
VID
------
1
VID
------
1
768