Disable Snmp; Show Snmp - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To enable SNMP:
DGS-3620-28PC:admin#enable snmp
Command: enable snmp
Success.
DGS-3620-28PC:admin#
73-2

disable snmp

Description
This command is used to disable the SNMP function. When SNMP function is disabled, the
network manager will not be able to access SNMP MIB objects. The device will not send traps or
notification to network manager either.
Format
disable snmp
Parameters
None. By default, SNMP is disabled.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP:
DGS-3620-28PC:admin#disable snmp
Command: disable snmp
Success.
DGS-3620-28PC:admin#
73-3

show snmp

Description
This command is used to display SNMP status.
Format
show snmp
829