D-Link xStack DGS-3620 Reference Manual page 522

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
john:123456@172.18.211.41:21/image/cfg.txt.
unit - (Optional) Specifies the switch stacking unit's ID.
<unit_id> - Enter the switch stacking unit's ID here.
all - Specifies that all the switch units in the stack will be used.
dest_file - (Optional) Specifies the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
boot_up - (Optional) Specifies that the firmware will be used as the boot-up firmware after the
download was completed successfully.
Restrictions
Only Administrators can issue this command.
Examples
This example shows how to download a firmware file from an FTP server.
DGS-3620-28PC:admin# download firmware_fromFTP 10.54.71.1 tcp_port 21 px.had
Command: download firmware_fromFTP 10.54.71.1 tcp_port 21 px.had
Connecting to server................... Done.
User(Anonymous): john
Pass:******
Download firmware...................... Done.
Please wait, programming flash......... Done.
DGS-3620-28PC:admin#
This example shows how to download a firmware form an FTP server using a string.
DGS-3620-28PC:admin# download firmware_fromFTP ftp:
john:123456@10.54.71.1:21/image/px.had
Command: download firmware_fromFTP ftp: john:123456@10.54.71.1:21/image/px.had
Connecting to server................... Done.
Download firmware...................... Done.
Please wait, programming flash......... Done.
DGS-3620-28PC:admin#
40-3 upload attack_log_toFTP
Description
This command is used to upload the attack log from the Switch to an FTP server.
Format
upload attack_log_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>}
dest_file <path_filename 64> | ftp: <string 128>] {unit <unit_id>}
Do not power off!
Do not power off!
517