D-Link xStack DGS-3620 Reference Manual page 867

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show attack_log index 1-3
Command: show attack_log index 1-3
Index Date
----- ---------- -------- -------- --------------------------------------------
--
3 2009-12-26 14:15:45
F3-10-94-89 on locking address full port 28
2 2009-12-26 14:15:45
F3-10-94-89 on locking address full port 28
1 2009-12-26 14:15:45
F3-10-94-89 on locking address full port 28
DGS-3620-28PC:admin#
74-22 clear attack_log
Description
This command is used to clear the switch's attack log.
Format
clear attack_log {[unit <unit_id 1-12> | all]}
Parameters
unit - (Optional) Specifies the switch unit to be cleared.
<unit_id 1-12> - Enter the switch unit ID here. This value must be between 1 and 12. If unit ID
is not specified, then this unit will be referred to as the master unit.
All – Specifies that all the switch unit's attack log will be cleared.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear the switch's attack log:
DGS-3620-28PC:admin# clear attack_log
Command: clear attack_log
Success.
DGS-3620-28PC:admin#
74-23 show cpu port
Description
This command is use to show statistics for Layer 2 or Layer 3 control packets that are trapped to
the CPU.
Time Level
WARN(4)
WARN(4) Port security violation mac addrss 00-18-
WARN(4) Port security violation mac addrss 00-18-
Log Text
Port security violation mac addrss 00-18-
862