D-Link xStack DGS-3620 Reference Manual page 966

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Check the detailed information for a specific multicasting route entry by specifying the options in
the command. To show the detailed information of the multicast route entries of the specific group
and source address.
DGS-3620-28PC:admin# show pim6 mroute s_g group FF13::100 source 2001::1111
Command: show pim6 mroute s_g group FF13::100 source 2001::1111
Group Address
Source Address
Uptime
Upstream Join State
Upstream Join Timer
Upstream Neighbor
RPF Interface
RPF Next Hop
RPF Route Protocol
RPF Route Address
RPF Route Prefix Length
RPF Route Metric Pref
RPF Route Metric
SPT Bit
Keepalive Timer
DR Register State
DR Register Stop Timer
DGS-3620-28PC:admin#
To show the detailed information on a downstream interface of the multicast routing entry (S, G),
specify the group address, source address and the interface name.
DGS-3620-28PC:admin# show pim6 mroute s_g group FF13::100 source 2001::1111
ipif n20
Command: show pim6 mroute s_g group FF13::100 source 2001::1111 ipif n20
Group Address
Source Address
Interface Name
Uptime
Have Local Membership
Join Prune State
Prune Pending Timer
Join Expiry Timer
Assert State
Assert Timer
Assert Winner Address
Assert Winner Metric Pref
Assert Winner Metric
DGS-3620-28PC:admin#
To show the whole IPv6 multicast routing table of (S, G, rpt) generated on the switch:
: FF13::100
: 2001::1111
: 150 sec
: Joined
: 20 sec
: FE80::12ED
: n20
: FE80::12ED
: OSPF
: 3FFE:10:10::147
: 64
: 110
: 3
: True
: 60 sec
: NoInfo
: 0 sec
: FF13::100
: 2001::1111
: n20
: 150 sec
: False
: Join
: 0 sec
: 10 sec
: NoInfo
: 0 sec
: -
: 0
: 0
961