D-Link xStack DGS-3620 Reference Manual page 524

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
upload cfg_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string 128>] {unit <unit_id>} {src_file <path_filename 64>}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include
| exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include |
exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}}
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
<ipv6addr> - Enter the IPv6 address of the FTP server here.
tcp_port - (Optional) Specifies the TCP port number used for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between
1 and 65535.
dest_file - Specifies the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
ftp: - Specifies the FTP connection details.
<string 128> - Enter the FTP connection details here. For example,
john:123456@172.18.211.41:21/image/cfg.txt.
unit - (Optional) Specifies the switch stacking unit's ID.
<unit_id> - Enter the switch stacking unit's ID here.
all - Specifies that all the switch units in the stack will be used.
src_file – (Optional) Specifies the source file's name and path.
<path_filename 64> - Enter the source file's name and path here. This can be up to 64
characters long.
include – (Optional) Specifies to include a filter string.
exclude - (Optional) Specifies to exclude a filter string.
begin - (Optional) Specifies to use a filter string that begins with the string specified.
<filter_string 80> - Enter the filter string used here.
Restrictions
Only Administrators and Operators can issue this command.
Examples
This example shows how to upload the configuration file to an FTP server in the interactive mode.
DGS-3620-28PC:admin# upload cfg_toFTP 10.90.90.15 cfg.txt
Command: upload cfg_toFTP 10.90.90.15 cfg.txt
Connecting to server................... Done.
User(Anonymous): john
Password:******
Upload configuration................... Done.
DGS-3620-28PC:admin#
This example shows how to upload the configuration file to an FTP server using a string.
DGS-3620-28PC:admin# download cfg_fromFTP ftp: john:123456@10.90.90.15:21/cfg/
cfg.txt config_id 2
Command: download cfg_fromFTP ftp: john:123456@10.90.90.15:21/cfg/cfg.txt
config_id 2
519