D-Link xStack DGS-3620 Reference Manual page 404

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
config dhcp pool boot_file <pool_name 12> {<file_name 64>}
Parameters
<pool_name 12> - Enter the DHCP pool name.
<file_name 64> - (Optional) Specifies the file name of the boot image.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the boot file:
DGS-3620-28PC:admin#config dhcp pool boot_file engineering boot.had
Command: config dhcp pool boot_file engineering boot.had
Success.
DGS-3620-28PC:admin#
23-14 config dhcp pool next_server
Description
This command is used by the DHCP client boot process, typically a TFTP server. If next server
information is not specified, it will not be provided to the client. If this command is input twice for
the same pool, the second command will overwrite the first command.
Format
config dhcp pool next_server <pool_name 12> {<ipaddr>}
Parameters
<pool_name 12> - Enter the DHCP pool name.
<ipaddr> - (Optional) Specifies the IP address of the next server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the next server:
DGS-3620-28PC:admin#config dhcp pool next_server engineering 192.168.0.1
Command: config dhcp pool next_server engineering 192.168.0.1
Success.
399