D-Link xStack DGS-3620 Reference Manual page 687

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show jwac
Command: show jwac
State
Enabled Ports
Virtual IP/URL
Switch HTTP Port
UDP Filtering
Forcible Logout
Redirect State
Redirect Delay Time
Redirect Destination
Quarantine Server
Q-Server Monitor
Q-Server Error Timeout
RADIUS Auth-Protocol
RADIUS Authorization
Local Authorization
Function Version
DGS-3620-28PC:admin#
53-24 show jwac auth_state ports
Description
This command is used to display information for JWAC client hosts.
Format
show jwac auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a port range to show the JWAC authentication entries.
Note: If no port is specified, the JWAC authentication state will be displayed for all ports.
Restrictions
None.
Example
To display JWAC authentication entries for ports 1 to 2:
DGS-3620-28PC:admin#show jwac auth_state ports 1-2
Command: show jwac auth_state ports 1-2
Pri:Priority. State – A:Authenticated. B:Bloacked. -:Authenticating
Time – Aging Time/Idle Time for authenticated entries.
: Disabled
:
: 0.0.0.0/-
: 80 (HTTP)
: Enabled
: Enabled
: Enabled
: 1 Seconds
: Quarantine Server
:
: Disabled
: 30 Seconds
: PAP
: Enabled
: Enabled
: 2.11
682