D-Link xStack DGS-3620 Reference Manual page 938

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To list all the entries of multicast routing:
DGS-3620-28PC:admin# show pim ipmroute
Command: show pim ipmroute
PIM IP Multicast Route Table
UA = Upstream AssertTimer
AM = Assert Metric
AMPref = Assert MetricPref
ARB = Assert RPTBit
Group Address
---------------- ----------------- ---- ---- ------ ---- ---- ------- ----
225.0.0.0
225.0.0.1
225.0.0.5
225.7.7.5
226.0.0.0
227.0.0.3
232.0.0.0
239.255.255.250
Total Entries: 8
DGS-3620-28PC:admin#
80-14 create pim static_rp group
Description
This command is used to create a static RP.
Format
create pim static_rp group <network_address> rp <ipaddr>
Parameters
group - Specifies to assign the multicast group address for this static RP.
<network_address> - Enter the multicast group address used here.
rp - Specifies the IP address used by this static RP.
<ipaddr> - Enter the IP address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Source Address UA
12.90.90.90/32 0
12.90.90.90/32 0
12.90.90.90/32 0
12.90.90.90/32 0
12.90.90.90/32 0
12.90.90.90/32 0
12.90.90.114/32 0
12.90.90.90/32 0
AM AMPref ARB
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
933
Flag Type Mode
RPT (*.G) ASM
RPT (*.G) ASM
RPT (*.G) ASM
RPT (*.G) ASM
RPT (*.G) ASM
RPT (*.G) ASM
SPT (S.G) SSM
RPT (*.G) ASM