Show Bgp Flap_Statistics {[Ipv4 | Ipv6] Unicast - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#
Command: show bgp dampened_routes
BGP local router ID is 172.29.232.182
Status codes: s suppressed, d damped, h history, * valid, > best, i -internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
*d 10.0.0.0/16
*d 10.2.0.0/16
Total Entries :2
DGS-3620-28PC:admin#
12-47 show bgp flap_statistics
Description
This command is used to display flap entries in the Border Gateway Protocol's (BGP) routing table.
If both the IPv4 unicast and IPv6 unicast are not specified, routes for the IPv4 unicast address
family will be displayed.
Format

show bgp flap_statistics {[ipv4 | ipv6] unicast}

Parameters
ipv4 unicast – (Optional) Specifies to display flap statistics for the IPv4 unicast address family.
ipv6 unicast – (Optional) Specifies to display flap statistics for the IPv6 unicast address family.
Restrictions
None. (EI Mode Only Command)
Example
To show flap BGP routes information:
show bgp dampened_routes
From
172.16.232.177 00:18:4
172.16.232.177 00:28:5
215
Reuse Path
100 ?
100 ?