D-Link xStack DGS-3620 Reference Manual page 738

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Total Entries : 1
DGS-3620-28PC:admin#
59-19 show lldp remote_ ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specifies the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.
mode - (Optional) Select the mode: brief, normal, or detailed.
brief - Specifies to display the information in brief mode.
normal - Specifies to display the information in normal mode. This is the default display mode.
detailed - Specifies to display the information in detailed mode.
Restrictions
None.
Example
To display LLDP information for remote ports 1 and 2:
DGS-3620-28PC:admin#show lldp remote_ports 1-2
Command: show lldp remote_ports 1-2
Remote Entities Count : 0
DGS-3620-28PC:admin#
: IPv4
: 10.19.72.38
: Unknown
: 1.3.6.1.4.1.171.10.114.1.1
:
733