D-Link xStack DGS-3620 Reference Manual page 464

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
ipaddress - (Optional) Specifies the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP routing table.
Restrictions
None. (EI Mode Only Command)
Example
To display DVMRP routing table:
DGS-3620-28PC:admin# show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask
----------------------
10.0.0.0/8
20.0.0.0/16
30.0.0.0/24
Total Entries : 3
DGS-3620-28PC:admin#
Upstream Neighbor Metric
----------------- ------
10.90.90.90 2
20.1.1.1 2
30.1.1.1 2
459
Learned Interface
------- ----------
Local System
Local ip2
Local ip3
Expire
------
-
-
-