D-Link xStack DGS-3620 Reference Manual page 336

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# debug bgp show flag
Command: debug bgp show flag
Current BGP flags setting:
Peer FSM Event
OPEN Packet Receive
OPEN Packet Send
UPDATE Packet Receive
UPDATE Packet Send
KEEPALIVE Packet Receive
KEEPALIVE Packet Send
NOTIFY Packet Receive
NOTIFY Packet Send
REFRESH Packet Receive
REFRESH Packet Send
CAPABILITY Packet Receive
CAPABILITY Packet Send
Route MAP
Access List
Prefix List
ERROR Information
DGS-3620-28PC:admin#
20-38 debug bgp all flag
Description
This command is used for setting all BGP debugging flags to disable or enable.
Format
debug bgp all flag [enable | disable]
Parameters
enable - Enable the BGP debug function.
disable - Disable the BGP debug function.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure all BGP debug flags' state to enable:
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
331