D-Link xStack DGS-3620 Reference Manual page 31

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator-level users can issue this command.
Example
To reset all the switch parameters except the IP address:
DGS-3620-28PC:admin#reset
Command: reset
Are you sure to proceed with system reset except IP address?(y/n)
Success.
DGS-3620-28PC:admin#
To reset the system configuration settings:
DGS-3620-28PC:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
DGS-3620-28PC:admin#
To reset all system parameters, save, and restart the switch:
DGS-3620-28PC:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration... Done.
Saving all configuration to NV-RAM... Done.
Please wait, the switch is rebooting...
2-23 login
Description
This command is used to log in to the switch.
Format
login
Parameters
None.
Restrictions
None.
26