D-Link xStack DGS-3620 Reference Manual page 768

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#
64-12 config mac_based_access_control max_users
Description
This command is used to configure the MAC-based access control maximum number of
authorized users.
Format
config mac_based_access_control max_users [<value 1-4000> | no_limit]
Parameters
<value 1-4000> - Enter the maximum number of authorized users.
no_limit - Specifies an unlimited number of authorized users.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the MAC-based access control maximum number of authorized users:
DGS-3620-28PC:admin#config mac_based_access_control max_users 2
Command: config mac_based_access_control max_users 2
Success.
DGS-3620-28PC:admin#
64-13 config mac_based_access_control authorization attributes
Description
This command is used to enable or disable the acceptance of an authorized configuration. When
authorization is enabled for MAC-based access controls with RADIUS authentication, the
authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the
RADUIS server will be accepted if the global authorization status is enabled. When authorization is
enabled for MAC-based access controls with local authentication, the authorized attributes
assigned by the local database will be accepted.
Format
config mac_based_access_control authorization attributes {radius [enable | disable] | local
[enable | disable]}(1)
763