D-Link xStack DGS-3620 Reference Manual page 355

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
20-61 debug dhcpv6_relay state enable
Description
This command is used to enable the DHCPv6 relay Debug function.
Format
debug dhcpv6_relay state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled DHCPv6 relay debug function:
DGS-3620-28PC:admin#
Command: debug dhcpv6_relay state enable
Success.
DGS-3620-28PC:admin#
20-62 debug dhcpv6_relay state disable
Description
This command is used to disable the DHCPv6 relay Debug function.
Format
debug dhcpv6_relay state disable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disabled DHCPv6 relay debug function:
debug dhcpv6_relay state enable
350