D-Link xStack DGS-3620 Reference Manual page 155

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
ipaddress - The IP address of the end node or station.
<ipaddr> - Enter the IP address.
static - Displays the static entries to the ARP table.
mac_address - Displays the ARP entry by MAC address.
<macaddr> - Enter the MAC address.
Note: If no parameter is specified, all ARP entries will be displayed.
Restrictions
None.
Example
To display the ARP table:
DGS-3620-28PC:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address
------------- ---------------
System 10.0.0.0
System 10.90.90.90
System 10.255.255.255
Total Entries: 3
DGS-3620-28PC:admin#
7-6 show arpentry force_aging_addr
Description
This command is used to display the force aging entry in the ARP table.
Format
show arpentry force_aging_addr
Parameters
None.
Restrictions
None.
MAC Address Type
----------------- ---------------
FF-FF-FF-FF-FF-FF Local/Broadcast
00-01-02-03-04-00 Local
FF-FF-FF-FF-FF-FF Local/Broadcast
150