Show Syslog Host - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Success
DGS-3620-28PC:admin#
74-18

show syslog host

Description
This command is used to display syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
<index 1-4> - (Optional) Specifies the host index.
Note: If no parameter is specified, all hosts will be displayed.
Restrictions
None.
Example
To display syslog host configurations:
DGS-3620-28PC:admin#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host 1
IP Address
Severity
Facility
UDP port
Status
Host 2
IP Address
Severity
Facility
UDP port
Status
Total Entries : 2
DGS-3620-28PC:admin#
: 10.1.1.2
: Warning
: Local10
: 514
: Disabled
: 3000:501:100:ffff:101:202:303:1
: Emergency
: Local10
: 514
: Disabled
859