D-Link xStack DGS-3620 Reference Manual page 50

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
3-18 config 802.1x guest_vlan ports
Description
This command is used to configure a guest VLAN setting.
Format
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]
Parameters
<portlist> - Enter a range of ports to be configured.
all - Specifies to configure all ports.
state - Specifies the guest VLAN port state of the configured ports.
enable - Join the guest VLAN.
disable - Remove from guest VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a guest VLAN setting for ports 1 to 8:
DGS-3620-28PC:admin# config 802.1x guest_vlan ports 1-8 state enable
Command: config 802.1x guest_vlan ports 1-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
DGS-3620-28PC:admin#
3-19 show 802.1x guest_vlan
Description
This command is used to display guest VLAN information.
Format
show 802.1x guest_vlan
Parameters
None.
45