Table of Contents
Advertisement
Connecting Cables to the Device
About this task
Follow this procedure to connect the power, network, and serial cable supplied with the accessories kit.
Important:
The serial connection is used only for configuring the IP address of the device.
Caution:
During this procedure, follow the safety guidelines described in the Safety Guide.
Procedure
1. On the rear panel, connect the power cable to the AC power connector
Installation Guide for Avaya Scopia
This secures the front panel to the front of the rack and the outer rail to the rack.
The outer rail was already secured in
Figure 15: Securing the front panel of the device to the front post
panel of the device
on page 20).
®
Application Server Version 2
Mounting the Outer Rails on to the Rack
on page 11.
(Figure 16: Rear
Setting up the Device | 19
Advertisement
Table of Contents
