Sal Gateway Installation; Connectivity; Connecting Ethernet Cables - Avaya S8800 Manual

Installing and connecting peripheral equipment

SAL gateway installation

Customer provided hardware
Personal computer
For more information about installing SAL, see the Secure Access Link 1.8 SAL Gateway
Implementation Guide, available as part of the software download from the Product Licensing
and Delivery System (PLDS) Web site: http://plds.avaya.com.

Connectivity

Connecting Ethernet cables

Use standard CAT5 cables with RJ–45 connectors on each end to connect the server, Ethernet
switch, and port network (if there is any).
The S8800 Server can be connected to H.248 gateways as well as port networks.
1. Connect the Ethernet connector 1 to the Ethernet switch (customer LAN / processor
2. Connect the System management Ethernet connector (IMM) to the Ethernet switch.
3. Connect a bridged interface (Ethernet Connector 1(eth0) or Ethernet Connector 5)
4. Connect the Ethernet connector on UPS unit to the Ethernet switch.
30 Installing the Avaya S8800 Server for Avaya Aura
Ethernet
to the customer LAN. Ethernet Connector 5 is used as the second NIC for bonding to
Ethernet Connector 1 for network redundancy.
™
Communication Manager June 2010