Server installation
Connecting the MAS and MSS with an Ethernet switch
Connecting the MAS and MSS
When you have an MSS with more than one MAS, you must use an Ethernet switch to create
the Private LAN for Modular Messaging.
Caution:
In a multiple-MAS system, do not connect any MASs except the first to the Ethernet switch
until you are ready to configure that server. Otherwise, the unused MAS might create errors
on the private network even if you turn off the server.
1. Connect the Private LAN connection on the MSS and each MAS to the Ethernet
2. Connect each server, as needed, to the corporate LAN with a standard Ethernet
Ethernet switch connections
28
Installing the Avaya S8730 Server for Modular Messaging
switch.
cable.
January 2009