Connecting The Chassis Rails To The Server - Avaya AG250 Hardware Installation Manual

Connecting the Chassis Rails to the Server

1
2
3
4
Both chassis rails have a locking tab, which serves two functions. The first
function is to lock the server into place when installed and pushed fully
into the rack, which is its normal position. The second function is to lock
the server in place when the rail is fully extended from the rack. This
prevents the server from coming out of the rack when you pull it out for
servicing.
To connect the chassis rails to the server:
Position the fixed chassis rail sections (A) that you just removed along the
side of the server, making sure the five screw holes align. Note that the
rails are left/right specific.
Screw the rail securely to the side of the chassis, as illustrated below.
Repeat this procedure for the other rail on the other side of the chassis.
If you are installing the server into a two-post rack, also attach the rail
brackets.
Chapter 1
Rack Mounting the Application Gateway
Application Gateway Hardware Installation Guide
Installing the Application Gateway
7