Recommended Test Equipment; Safety Instructions - Avaya S8730 Installing

Recommended test equipment

Verify that the following test equipment will be available when installation and configuration of
the system is complete:
• At least two telephones connected through the switch or private branch exchange
(PBX). The telephones must be of the same type as most of the telephones the
customer plans to use on the system.
• Access to a fax machine if fax messaging will be installed on the system.

Safety instructions

Use the following safety guidelines to ensure your personal safety and to help protect your
system and working environment from potential damage.
• Use only the power cord provided with the server.
• Do not place objects on AC power cords or cables. Arrange them so that no one may
accidentally step on or trip over them.
• Place the server away from radiators, heat registers, stoves, amplifiers or other
sources of heat.
• Always use a UPS to protect against fluctuations or temporary interruptions in the
power supply.
Observe the following precautions for rack stability and safety. Also refer to the rack installation
documentation accompanying the rack for specific caution statements and procedures.
Systems are considered to be components in a rack. Thus, "component" refers to any system
as well as to various peripherals or supporting hardware.
Caution:
Before installing systems in a rack, install front and side stabilizers on stand-alone racks or
the front stabilizer on racks joined to other racks. Failure to install stabilizers accordingly
before installing systems in a rack could cause the rack to tip over, potentially resulting in
bodily injury under certain circumstances. Therefore, always install the stabilizer(s) before
installing components in the rack.
If you are installing more than one server, install the mounting rails so that the first server is
installed in the lowest available position in the rack. If you are installing a UPS in the same
Installing the Avaya S8730 Server for Modular Messaging
- Preferably the test telephones will have a data display for testing integration
and the Find Me and Call Me features.
- If the message waiting indicator (MWI) for the system is a lamp, the test
telephone must be equipped with a lamp. If the MWI is a stutter tone, the
telephone must be able to provide the stutter notification.
- Place the test telephone so you can easily see the monitor while using the
telephones.
Recommended test equipment
January 2009 19