System board and components
Figure 177: Removing the system board (D)
Ê Use both hands to lift the system board carefully out of the chassis.
V
CAUTION!
Always take the system board with both hands!
Never lift the system board one-sided or at a heat sink, because the
solder connections between the socket and the system board come
under tension and increase the risk of damage and malfunction!
Do not damage the EMI springs which are essential to comply with
applicable EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê Place the removed and the new system board on an antistatic surface.
13.3.1.3 Installing the new system board
Ê Check the settings on the new system board (see section
settings" on page
Ê Insert the system board on the bolts (see figure 177).
216
236).
Upgrade and Maintenance Manual
"Onboard
GX2460 M1