Ducati Monster 695 User Manual page 73

Maintenance operations
Grease the cable end (10) and the pulley.
Refit the cover with extreme care. Insert the cable (10) in the slider (A) of the cover (8).
Tighten the two screws (9) to secure the cover.
Adjusting the position of the gear change and rear brake pedals
The position of the gear change and rear brake pedals in relation to the footpegs can be adjusted to suit rider
preferred riding position.
To adjust the position of the gear change pedal, proceed as follows:
Clamp the rod (1) and loosen the lock nuts (2) and (3).
Note
Lock nut (2) has a left-hand thread.
Fit an open-end wrench to the hexagon of the rod and turn the rod (1) until the gear change pedal is in the desired
position.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_4_5_00.18.1.html (27 of 29) [10/7/2008 8:42:49 PM]