Table of Contents
Advertisement
Head unit: checks and adjustments
Checking and adjusting valve clearance
Operations
Remove valve covers
Remove timing belt covers
Note
For reasons of clarity, the figures show an engine block removed from the frame.
Take off the inspection cover on generator side and install tool part no. 88713.0123.
Turn the crankshaft until lining up the transmission pulley mark with the clutch cover mark.
Look through the inspection window in the generator cover. The flywheel mark and the cover mark (A) of both
cylinders should be aligned.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_4A9_00.62.1.html (2 of 8) [10/7/2008 8:45:21 PM]
Reference See Section
N 4.3,
Removing the valve covers
N 4.2,
Removing the timing side
covers
Hide quick links:
Advertisement
Table of Contents
