Ducati Monster 695 User Manual page 202

Rear swingarm
Working on the swingarm left side, fit the greased shaft (6) and the circlip (5) and insert it for half its length. Push
the swingarm left section against the crankcase, and fit the shim (9) chosen during end float inspection in-between
swingarm right section and engine. Insert the shaft completely, make sure not to damage the shims (9).
Fit the other circlip (5). Tighten the screws (7) to the specified torque (Sect. C 3,
Fit the plugs (4) on either side of the swingarm.
Operations
Refit the shock absorber and the
linkage to the rear swingarm
Refit the vertical cylinder exhaust
pipe
Refit the rear brake caliper
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_5_8_00.36.1.html (5 of 6) [10/7/2008 8:43:57 PM]
Reference See Section
G 7, Reassembling the rear shock
absorber
L 8, Refitting the exhaust system
G 6, Refitting the rear brake system
Frame torque settings).