Ducati Monster 695 User Manual page 231

Steering
Note
All components installed to steering head and bottom yoke, including electrical cables and Bowden cables, may be left
in place, as long as they do not impair the disassembly procedure.
Loosen the screw (1) securing the steering head (2) to the ring nut (3).
Lift the steering head (2).
Loosen the ring nut (3) with the tool no. 88713.1058 and undo from the steering shaft.
Remove seal (4), bearing inner ring (A) and ball ring (B) of the top bearing (5) from steering shaft.
Slide bottom yoke (9) and steering shaft out of frame tube.
Withdraw the ball ring (B) of the bottom bearing (6).
The inner ring (A) and seal (7) of the bottom bearing (6) remain on the steering shaft.
Remove inner ring (A) and spacer (8) from the steering shaft using an all-purpose puller (see figure). Do not damage
the seat.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_2_7_00.42.1.html (4 of 8) [10/7/2008 8:44:15 PM]