Thread - Ducati Monster 695 User Manual

Casing unit: outer components
Refit the neutral light switch (19) with seal (20) and tighten to the specified torque (Sect. C 3,
settings).
Apply threadlocker to the plug (27), fit the seal, start it in its thread and tighten it to the specified torque (Sect. C 3,
Engine torque settings).
Refit mesh filter (18) with seal, as described in Sect. D 4,
Refit the ratchet and gear stopper (Sect. N 7.1,
To refit stud bolts (12) on casing, apply speed bond on threads and tighten to the specified torque (Sect. C 3,
torque settings). Use the suitable tool (shown).
Operations
Refit the cylinder-piston assemblies
Refit complete head assembly and
timing system parts
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9A9_00.73.1.html (6 of 10) [10/7/2008 8:46:24 PM]
Changing the engine oil and filter
Reassembling gear stopper and
Reference See Section
N 5, Refitting cylinder / piston assy
N 4.2, Cylinder heads: side covers /
timing system
Engine torque
cartridge.
ratchet).
Engine