Cylinder heads: side covers / timing system
Use tool part no. 88713.2107 to prevent belt roller rotation.
Smear a film of recommended grease on ring nut (13) thread and underside, then fit washer (14) and ring nut.
Caution
At reassembly, always use new ring nuts.
Fit the bush of tool part no. 88700.5644 to a torque wrench and tighten ring nuts (13) to the specified torque (Sect.
C 3,
Engine torque
settings).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (9 of 17) [10/7/2008 8:45:27 PM]