Table of Contents
Advertisement
Cylinder heads: side covers / timing system
Rotate the crankshaft until bringing the piston of the horizontal cylinder at TDC during the combustion stroke. This is
indicated by the mark (A) on the timing layshaft belt roller (8) aligning with the mark (B) on the clutch cover.
Unscrew the two screws (D) and remove the small cover (C) from the generator cover.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (12 of 17) [10/7/2008 8:45:27 PM]
Hide quick links:
Advertisement
Table of Contents
