Ducati Monster 695 User Manual page 496

Flywheel - generator
Ref Qty. Description
10 8 M6x25 mm
screws
11 2 M6x20 mm
screws
12 3 M6x30 mm
screws
Tighten the retaining screws to the specified torque (Sect. C 3,
Fit the washer (35) and the hose guide (36) under the screw (12), close to the starter motor.
Tighten the retaining screws to the specified torque (Sect. C 3,
Dampen oil seal (3) with alcohol and fit it on the generator cover, at the gear change lever shaft (Sect. F 5,
the gear change control).
Fit the O-ring (9) and shim (8) to generator cover. Position the engine sensor (7) into its seat and secure it with the
screw (1). Tighten the screw to the specified torque (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_8_9_00.72.1.html (12 of 14) [10/7/2008 8:46:19 PM]
Engine torque settings).
Engine torque settings).
Engine torque settings).
Refitting