Front and rear mudguard
Position the front mudguard (1) and start the retaining screws (3) complete with their washers (2) in their holes.
Tighten the screws (3) to the specified torque (Sect. C 3,
Removing the rear mudguard
Unscrew the four screws (5) and detach the mudguard (4) from the swingarm.
Refitting the rear mudguard
Fit the rear mudguard (4) and tighten the four screws (5).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_E_4_4_00.23.1.html (3 of 4) [10/7/2008 8:43:15 PM]
Frame torque
settings).