Ducati Monster 695 User Manual page 197

Hide thumbs Also See for Monster 695:
Table of Contents

Advertisement

Rear wheel
Tighten the nut finger-tight.
Tension the chain and align the wheel (Sect. D 4,
Make sure the brake hose does not become trapped or is exceedingly bent.
Tighten the nut (1) onto wheel shaft (2) to the specified torque (Sect. C 3,
Tighten the chain tensioner screws (4) to the specified torque (Sect. C 3,
Refit the brake caliper (A), tighten the screws (B) to the specified torque (Sect. C 3,
Note
The air gap between sensor (S) and brake disc retaining screw must be 0.6-2.2 mm.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_4_8_00.35.1.html (5 of 5) [10/7/2008 8:43:53 PM]
Adjusting chain
tension).
Frame torque
settings).
Frame torque
settings).
Frame torque
settings).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents