Lighting devices
Release the bulb retaining clip (3) and take bulb out of mount.
Fit a bulb of equal rating (Sect. C 1.1,
Note
Be careful to hold the new bulb at the base only. Never touch the transparent body with your fingers or
it will blacken resulting in reduced bulb brilliancy.
Insert the locating pins of the bulb base into their seats to obtain correct alignment.
Hook the clip (3) to the headlamp holders.
Connect the cables previously disconnected.
To replace the bulbs of the parking light, remove the connector (4).
The bulb has a bayonet fitting. Press and twist clockwise to extract.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_P_4_9_00.81.1.html (2 of 8) [10/7/2008 8:47:05 PM]
Lights / instrument
panel).