Thread - Ducati Monster 695 User Manual

Casing unit: connecting rods
Overhauling the crankshaft
The main bearings and the crank pins must not be grooved or scored.
Threads, keyways and slots must be in good condition.
Check for fretting or burrs in the fillet between crank pin and shoulder.
Fillet radius: 1.5 mm.
Use a micrometer to measure oval and taper of the crank pin. Measure oval and taper in several different directions
(Sect. C 1.1, Cylinder /
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9C9_00.75.1.html (5 of 10) [10/7/2008 8:46:40 PM]
piston).