Casing unit: crankcases
Fit the forks to the drum and fit the pins (Q).
Close the casings without the crankshaft to check gearbox position.
Install and adjust the gear selector lever assembly (M) (see Sect. N 7.1,
Place gearbox in NEUTRAL and look through the opening of the horizontal cylinder to check that the clutch dogs of the
sliding gears are equally distant from the fixed gear dogs (Fig. 1 - Fig. 2).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9B9_00.74.1.html (19 of 25) [10/7/2008 8:46:35 PM]
Reassembling the gear selector
lever).