Head unit: valves - rocker arms
Slide the complete head on the stud bolts and push it down onto the cylinder.
Insert the special washers (20) on the stud bolts with the sharp edge facing the head and the flat side pointing
inwards.
Grease the underhead of the nuts (19) and the thread of the stud bolts with the specified grease.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4D9_00.65.1.html (22 of 23) [10/7/2008 8:45:45 PM]