Ducati Monster 695 User Manual page 170

Front wheel
Warning
Position the front wheel; note that the arrow on the wheel rim indicates direction of rotation when running.
Insert the wheel shaft (8) from the right side.
Place the spacer (3) between wheel and left fork leg.
Apply service tool part no. 8000.70139 to wheel shaft (8).
Insert the shaft (8) fully home into the wheel hub; insert the peg of the service tool in the special notches at the
bottom end of the fork.
Grease the thread and underhead of shaft lock nut (1). Fit and tighten the lock nut on the end of the wheel shaft.
Tighten the nut (1) to the specified torque (Sect. C 3,
Grease the thread and underhead of the screws (A).
Tighten both brake caliper (C) screws (A).
Tighten the screws (A) to the specified torque (Sect. C 3,
Repeat the process for the other caliper.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_1_8_00.32.1.html (6 of 7) [10/7/2008 8:43:38 PM]
Frame torque settings).
Frame torque settings).