Head unit: camshafts
Note
Actual deviation is half the gauge reading.
The camshaft is marked as follows:
O: horizontal
V: vertical
Checking the oil seals
Change oil seals at each cylinder head overhaul.
Install new seals using suitable tools.
Lubricate oil seal lip after installation.
This operation requires the utmost care.
Checking the circlips
Note
Replace any snap rings which are distorted or have lost their spring.
All circlips have a side (A) which is completely flat and has a sharp edge and a side (B) with a slightly rounded edge.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4C9_00.64.1.html (13 of 18) [10/7/2008 8:45:35 PM]