Casing unit: outer components
Refit the lubrication system
Refit the engine to the frame
Removing the timing lay gear
Operations
Remove the generator-side cover
and the complete generator
Slide out the drive gear (A) of the timing gear pair (2) and the key (5).
Unbend the safety washer (3) of the timing gear retaining nut (4).
Hold the timing gear in position and hold it steady by fitting a pin (C) into one of the holes. Unscrew the lock nut (4).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9A9_00.73.1.html (7 of 10) [10/7/2008 8:46:24 PM]
N 2.1,
Refitting the oil pump
N 1,
Reassembling the engine
Reference See Section
N 8,
Flywheel - generator