Table of Contents
Advertisement
Front brake control
diagram.
Line up the clamp / master cylinder body (1) split line (A) with the dot (B) on the handlebar.
Fit the two screws of the clamp (10) securing front brake master cylinder to the handlebar. Tighten U-bolt (10)
screws to the specified torque (Sect. C 3,
and then proceeding in a 1-2-1 sequence. If hose (C) has been disturbed, follow indications as specified under Sect. G
3,
Refitting the front brake
Operations
Connect the brake line to master
cylinder
Fill the braking system
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_3_6_00.27.1.html (3 of 3) [10/7/2008 8:43:25 PM]
Frame torque
system.
Reference See Section
G 3,
Refitting the front brake system
D 4,
Filling the brake circuit
settings) starting from the top one, indicated with an arrow,
Hide quick links:
Advertisement
Table of Contents
