Table of Contents
Advertisement
Charging system – battery
Warning
Do not graze or pierce the sealed areas.
Set the fluid container (2) upside-down. Ensure the six sealed elements match the six filler holes on the battery.
Push down the container (2) and break the seals so that fluid can flow out.
Note
Do not tilt the fluid container or the flow might stop.
Ensure that air bubbles come out from all six holes. Let the container in this position for more than twenty minutes.
Should no air bubbles show from one of the filler holes, slightly tap on the bottom of the corresponding bottle.
Caution
Never detach the container from the battery. Do not cut or pierce the bottle with fluid.
Ensure that all fluid has flown off. Carefully remove the container (2) from the battery.
Fit the cap bar (3) -previously removed from the electrolyte container (2)- to the battery, ensure the caps plug off all
filler holes.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_P_2_9_00.79.1.html (4 of 12) [10/7/2008 8:46:59 PM]
Hide quick links:
Advertisement
Table of Contents
