Rear suspensions
Refitting the rear suspension
Grease shank and thread of the screw (10) and the contact faces of the washer (9) with specified grease.
Grease shank and thread of pivot bolt and the underside of nut (16) with specified grease.
Insert the complete rocker arm between the frame supports, as shown in the figure.
Fit the washer (9) to the screw (10) with the concave side facing the screw. Insert the screw fully home into the
frame.
Install the nut (16) with the hexagon facing outward and with the spacer (14).
Tighten the nut (16) and tighten the screw (10) to the specified torque (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_7_8_00.38.1.html (7 of 8) [10/7/2008 8:44:04 PM]
Frame torque
settings).