Head unit: camshafts
Disassembling the cam cover
Remove the circlip (18) that holds the bearing in place. Remove the camshaft bearing (19) from the cam cover using
a suitable puller.
Caution
Do not reuse the bearings after removal.
Reassembling the cam cover
Install the bearing (19) with the shielded side (A) outward.
Lubricate all components with engine oil before refitting.
Insert the circlip (18) into the cam cover groove to hold the bearing securely in place.
Check gasket (17) and replace if needed.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4C9_00.64.1.html (8 of 18) [10/7/2008 8:45:35 PM]