Ducati Monster 695 User Manual page 340

Removing - reassembling the complete engine
Slide out the rear screw (4) up to half its length and insert the suitable support part no. 88713.1515 on the left side.
Tighten screw (A) onto swingarm left clamp, in this way you also tighten the support part no. 88713.1515.
Completely remove swingarm shaft (A) and the upper screw (4).
Fit the other support on the right side and secure it with the other screw (B). The supports hold frame and swingarm
in the correct position for refitting the engine later on.
Remove the engine (5).
Reassembling the engine
Reassembling is a reversal of the removal sequence outlined above.
Caution
Position suitable shims (C) between engine and swingarm (Sect. G 5,
Lubricate the nuts (3) of the mounting bolts (2) and (4).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_1_9_00.59.1.html (4 of 5) [10/7/2008 8:45:10 PM]
Refitting the rear swingarm).