Gearbox assembly: gear selector levers
Reassembling the gear selector lever
Position the complete gear selector lever (25) into the chain-side casing.
Position the gearbox drum selector fork in the centre of the drum rollers.
Temporarily fit gear change lever (or a service lever) and shift to third gear.
Fit plate part no. 88713.1091 to the fork shaft pins (see figure).
Align the notch (A), which marks the centreline of the fork shaft pawl, with the end of the plate (B).
Then tighten (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_7A9_00.70.1.html (7 of 8) [10/7/2008 8:46:06 PM]
Engine torque
settings) the gear selector lever retaining screws (18) and (20).