Testers
Checking fuel pressure
Note
A table at the end of this section explains the icons used in this procedure.
Lift the fuel tank (Sect. L 2,
Remove the fuel delivery hose (20).
Using fuel pressure tube (17), connect one end (D) to union of delivery hose to tank and the other end (E) to delivery
hose (20): in this way you create a pressure pick-up point (F).
Connect the pressure sensor (5), to the port (F) of hose (17), in order to convert the pressure reading into an electric
signal.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_5_5_00.19.1.html (27 of 41) [10/7/2008 8:43:05 PM]
Removing the fuel
tank).